In a previous post, I introduced winding sticks but did not explain in detail how they are used.
Winding sticks are used in pairs.
If your two sticks are of contrasting colours it is much easier to see them independently. Sticks of the same colour tend to blend into each other making the sighting job more difficult.
One stick is laid at each end of a board or plank, while the user then sights over the two sticks - try to center your view and align the middle of the two winding sticks. (This is why I put center-marks onto my pair of winding sticks.)
Align your view so that you just see the farthest stick sticking out above the top of the closest stick.
On a good and flat board/plank, as pictured above, you will immediately see that the two sticks are aligned. As you dip your view lower and the farthest stick disappears from view, the entire stick disappears from view at the same instant.
On a twisted, non-flat board/plank, as pictured above, the two sticks will not line up. The farthest stick will have an obvious slant in comparison to the closest stick. The illustration above shows a board with an exaggerated amount of twist, but I guarantee you that your eye will see even the slightest twist immediately, if you use these sticks as directed.
Sunday 25 July 2010
Friday 16 July 2010
Buying a plane
I need a plane to flatten boards for my table, so I have been shopping around. All that seems to be available is the Stanley no. 4 planes. I want a larger plane, preferrably a No 7.
I've been to numerous shops, starting with a few pawn shops in the area. My thinking is that most second hand planes should be good. A plane could/should last a lifetime!?! Not so?
I eventually found a larger plane at the supplier where I bought my table saw. New.
I was well pleased, since I am happy with the saw, although the price is a bit more than I wanted to spend initially. But, I need the plane, cannot find one anywhere, so let's go for it.
The plane in question is a No6 Jack Plane by Industro. I have no idea about brands and such, but I reckon that if Pretoria Tool Center are selling them, they should be pretty decent.
Wrong.
I brought my new plane home, and immediately was upset. The bolt on which the blade-depth screw turns, was completely stripped.
I called up the next morning and the manager tells me to bring the plane back, he'll swop it out.
I drive all the way to center of town the next day. The one other plane he has in the shop, has exactly the same problem.
I should have cut my losses right there.
Instead I allowed him to replace the defective bolt and screw, with a similar part from a smaller plane. I headed home with my fixed-up, brand new No 6 jack plane.
Pfffft.
I tested it and tested it, and for the life of my I could not get the blade square. It kept digging out chunks of wood with the right-hand edge of the blade, no matter what I did.
Let me make it real clear right now .. I am no expert when it comes to woodworking, but I am not a complete idiot. I can figure most things out.
I eventually took the blade out for the umpteenth time and held the side of the blade to my try-square handle... with the blade being 58mm across, it moved away from the try-square blade by 1mm across it's width.
I know this method of measuring cannot give me great accuracy, but this comes to around 10 degrees by which the blade is not square on the cutting edge. I am simply not happy with that.
I called up the supplier and the manager told me about the lever which moves the blade from side to side, suggesting I use that to straighten the blade. That does not work, I have it moved over as far as possible and that corner still bites into the wood.
The manager suggested that I then tweak the blade 'skew' against the cap-iron, in order to get it straight at the mouth.
No way!!! ... If I buy a car, the dealership cannot expect me to crank the steering wheel all the way to the left .. in order for the car to drive straight!
I'm taking it back.
The manager did not sound to happy, and mumbled something about giving me something of equal value.
That's not going to work either.
I do not need anything else.
I do not want anything else.
... a plane ... a No 6 or a No 7 ... a decent working one ... that's what I want, or my money back.
In honesty, I could have fixed the stripped bolt problem. Although, being 'backwards' thread it would have cost a little bit extra to get a bolt.
I can also have the blade re-ground to 90 degrees at an engineering shop, or if I find a sharpening place... but you know, I just spent R595.00 on this plane. Why should I still need to go to all that trouble to fix it when it's brand new?
This will be the third trip to the center of town, 30km each way. Plus it's been helluva inconvenient.
I've been to numerous shops, starting with a few pawn shops in the area. My thinking is that most second hand planes should be good. A plane could/should last a lifetime!?! Not so?
I eventually found a larger plane at the supplier where I bought my table saw. New.
I was well pleased, since I am happy with the saw, although the price is a bit more than I wanted to spend initially. But, I need the plane, cannot find one anywhere, so let's go for it.
The plane in question is a No6 Jack Plane by Industro. I have no idea about brands and such, but I reckon that if Pretoria Tool Center are selling them, they should be pretty decent.
Wrong.
I brought my new plane home, and immediately was upset. The bolt on which the blade-depth screw turns, was completely stripped.
I called up the next morning and the manager tells me to bring the plane back, he'll swop it out.
I drive all the way to center of town the next day. The one other plane he has in the shop, has exactly the same problem.
I should have cut my losses right there.
Instead I allowed him to replace the defective bolt and screw, with a similar part from a smaller plane. I headed home with my fixed-up, brand new No 6 jack plane.
Pfffft.
I tested it and tested it, and for the life of my I could not get the blade square. It kept digging out chunks of wood with the right-hand edge of the blade, no matter what I did.
Let me make it real clear right now .. I am no expert when it comes to woodworking, but I am not a complete idiot. I can figure most things out.
I eventually took the blade out for the umpteenth time and held the side of the blade to my try-square handle... with the blade being 58mm across, it moved away from the try-square blade by 1mm across it's width.
I know this method of measuring cannot give me great accuracy, but this comes to around 10 degrees by which the blade is not square on the cutting edge. I am simply not happy with that.
I called up the supplier and the manager told me about the lever which moves the blade from side to side, suggesting I use that to straighten the blade. That does not work, I have it moved over as far as possible and that corner still bites into the wood.
The manager suggested that I then tweak the blade 'skew' against the cap-iron, in order to get it straight at the mouth.
No way!!! ... If I buy a car, the dealership cannot expect me to crank the steering wheel all the way to the left .. in order for the car to drive straight!
I'm taking it back.
The manager did not sound to happy, and mumbled something about giving me something of equal value.
That's not going to work either.
I do not need anything else.
I do not want anything else.
... a plane ... a No 6 or a No 7 ... a decent working one ... that's what I want, or my money back.
In honesty, I could have fixed the stripped bolt problem. Although, being 'backwards' thread it would have cost a little bit extra to get a bolt.
I can also have the blade re-ground to 90 degrees at an engineering shop, or if I find a sharpening place... but you know, I just spent R595.00 on this plane. Why should I still need to go to all that trouble to fix it when it's brand new?
This will be the third trip to the center of town, 30km each way. Plus it's been helluva inconvenient.
Winding Sticks
While making my table top, I needed some way to check if the boards were flat. Eyeballing the boards is not really accurate. I read up about it and found out about winding sticks.
I took a piece of scrap wood from my offcut bin and broke it in half to test the theory.
Wow! These little planks really work!
They are extremely easy to use and accurately tell you if the board is not flat.
The wikipedia entry on winding sticks mentions that contrasting wood is often used.
Yeah??
Guess what .. that's exactly what I have.
Contrasting Obeche and Sapele Mahogany strips which are waiting for my boat build to start.
I simply pasted them together to form a stick.
Once I saw them finished, I decided to get a little fancy and insert a strip of the opposite wood as a "centerline" on each stick.
I am hugely satisfied with my new toys.
One benefit to making the winding sticks, was getting to see the colour of my strips with some 'finish' on them.
I used Deep Penetrating Furniture Wax from Woodoc. This brought out the colours with amazing depth. I was actually quite stunned at how beautiful the Sapele Mahogany is. I have subsequently put on a few layers of Antique Wax, also from Woodoc.
I took a piece of scrap wood from my offcut bin and broke it in half to test the theory.
Wow! These little planks really work!
They are extremely easy to use and accurately tell you if the board is not flat.
The wikipedia entry on winding sticks mentions that contrasting wood is often used.
Yeah??
Guess what .. that's exactly what I have.
Contrasting Obeche and Sapele Mahogany strips which are waiting for my boat build to start.
I simply pasted them together to form a stick.
Once I saw them finished, I decided to get a little fancy and insert a strip of the opposite wood as a "centerline" on each stick.
I am hugely satisfied with my new toys.
One benefit to making the winding sticks, was getting to see the colour of my strips with some 'finish' on them.
I used Deep Penetrating Furniture Wax from Woodoc. This brought out the colours with amazing depth. I was actually quite stunned at how beautiful the Sapele Mahogany is. I have subsequently put on a few layers of Antique Wax, also from Woodoc.
Monday 5 July 2010
Chasing your tail .. and getting bitten
Sometimes life gets frustrating for no good reason.
I have waited patiently for the wood strips to arrive for my boat project.
In the meantime I have been dabbling with various other ideas for projects which could run concurrently to the boat project since the boat is really a long term thing.
First off, I must repeat that the space I have is really limited and the boat will take up a great deal of it. For that reason I have been trying to decide if I should make tackle some of my other ideas first.
I need to make a second dog kennel for selling. This will not take very long, but it's a project that would be completed with more ease, if the boat forms are not yet installed on the strongback and taking up two thirds of the garage. Material needs to be ordered if I go ahead with this idea.
A friend caught up with me a few days ago and wants a custom piece of furniture. If I can complete this project to satisfaction, there will be an order for two more immediately, with the possibility of more orders after that. I think this project has serious potential and am waiting for the customized draft plans for the piece before I can proceed with it.
This led me to buying a book which has a plan similar to the custom piece my friend wants. The book has been tempting me for a while and I just needed a reason to buy it. Now I have the book, for a good reason and amongst other things, there is a beautiful plan for a dining table... for which I have some lovely wood for a top.
I think I must make such a table.
There.
So much to do.
The strips are beautiful and I am very happy, but they never sent the two sapele mahogany boards that I ordered with the strips. I thought I had more mahogany strips than ordered, so I figured they cut strips from all the planks, instead of saving two.
On Friday I went to the lumber merchant to get clarification.
When I got there, the guy who always helps me, rushed to tell me that he had my two planks and they were due for delivery again that same day. Ok, cool! (They've not been delivered - apparently I can now expect them on Monday. Tuesday will be fourteen days after the original promised delivery date)
So since I was already at the lumber yard, I bought a little extra wood for legs, rail and support framework for the dining table project.
One of the lumber yard customers approached me, asking if I could make him a special wine-rack. I gave him my cell-phone number. Seems like I get approached for things from all quarters.
Whilst busy selecting wood, waiting for the planks to be trimmed and planed, I got distracted and "lost" my cellphone.
We called it from the office, it rang to voicemail, then when it was called again it was switched off. It's nowhere to be found - so it's undoubtedly been pilfered.
It's such an inconvenience. 6 years worth of numbers and contact details gone. I cannot get a replacement until Wednesday at the earliest, but I'll try to get my existing number...
My wine rack customer is probably calling me and wondering why I never answer my phone.
If the Mahogany planks were delivered as they should have been, I'd never have been at the lumber merchant on Friday afternoon.
The boat already has a sad memory attached to it. :(
I have waited patiently for the wood strips to arrive for my boat project.
In the meantime I have been dabbling with various other ideas for projects which could run concurrently to the boat project since the boat is really a long term thing.
First off, I must repeat that the space I have is really limited and the boat will take up a great deal of it. For that reason I have been trying to decide if I should make tackle some of my other ideas first.
I need to make a second dog kennel for selling. This will not take very long, but it's a project that would be completed with more ease, if the boat forms are not yet installed on the strongback and taking up two thirds of the garage. Material needs to be ordered if I go ahead with this idea.
A friend caught up with me a few days ago and wants a custom piece of furniture. If I can complete this project to satisfaction, there will be an order for two more immediately, with the possibility of more orders after that. I think this project has serious potential and am waiting for the customized draft plans for the piece before I can proceed with it.
This led me to buying a book which has a plan similar to the custom piece my friend wants. The book has been tempting me for a while and I just needed a reason to buy it. Now I have the book, for a good reason and amongst other things, there is a beautiful plan for a dining table... for which I have some lovely wood for a top.
I think I must make such a table.
There.
So much to do.
- Boat
- Dog Kennel
- Dining Table
- "Custom" furniture order (more about this later)
The strips are beautiful and I am very happy, but they never sent the two sapele mahogany boards that I ordered with the strips. I thought I had more mahogany strips than ordered, so I figured they cut strips from all the planks, instead of saving two.
On Friday I went to the lumber merchant to get clarification.
When I got there, the guy who always helps me, rushed to tell me that he had my two planks and they were due for delivery again that same day. Ok, cool! (They've not been delivered - apparently I can now expect them on Monday. Tuesday will be fourteen days after the original promised delivery date)
So since I was already at the lumber yard, I bought a little extra wood for legs, rail and support framework for the dining table project.
One of the lumber yard customers approached me, asking if I could make him a special wine-rack. I gave him my cell-phone number. Seems like I get approached for things from all quarters.
Whilst busy selecting wood, waiting for the planks to be trimmed and planed, I got distracted and "lost" my cellphone.
We called it from the office, it rang to voicemail, then when it was called again it was switched off. It's nowhere to be found - so it's undoubtedly been pilfered.
It's such an inconvenience. 6 years worth of numbers and contact details gone. I cannot get a replacement until Wednesday at the earliest, but I'll try to get my existing number...
My wine rack customer is probably calling me and wondering why I never answer my phone.
If the Mahogany planks were delivered as they should have been, I'd never have been at the lumber merchant on Friday afternoon.
The boat already has a sad memory attached to it. :(
Sunday 4 July 2010
Understand wood distortions...
In a previous post I mentioned that I did not know the correct term to describe a specific distortion in wood. So I have been doing some reading research.
So far I have found that wood will distort in four principal ways. These would be the four general ways of describing boards which are not flat.
In these pictures, the distortions are shown, in comparison to a normal flat board.
So far I have found that wood will distort in four principal ways. These would be the four general ways of describing boards which are not flat.
In these pictures, the distortions are shown, in comparison to a normal flat board.
- Bow - the board curves in it's length, around the wider side.
- Cup - the board is curved in it's width, whilst it stays flat in it's length.
- Spring - again, the board is flat but is curved in it's length, this time it curves around the thinner edge.
- Twist - the board twists up in opposite directions around the ends.
Subscribe to:
Posts (Atom)